Electrical Services in California | Repairs, Panels, EV & Commercial

Emergency Electrician

When the power quits or an outlet starts arcing, waiting until Monday is not an option. BroadMoor Electric Solutions runs a 24 hour dispatch line for California and the surrounding your County area, so a real person answers at 2am and an electrician is on the way with the parts to make it safe tonight.

Total or partial power loss

Half the house dark, one room dead, or nothing at all — we trace it from the meter inward.

Breaker that keeps tripping

We find the overload, short or failing breaker instead of resetting it and hoping.

Sparking or scorched outlets

Arcing receptacles get cut off, replaced, and the branch circuit tested end to end.

Burning smell with no visible source

Thermal and voltage testing to locate hot joints, loose neutrals and failing devices.

Flickering or dimming lights

Usually a loose neutral, a bad connection or an overloaded circuit. All three are findable.

Panel noise, heat or smoke

Buzzing and warm breaker faces mean the panel needs immediate attention.

Water damage to electrical

Post-leak or post-flood shutdown, drying, testing and safe re-energizing.

Storm and outage damage

Service mast, meter base and feeder repairs after wind, rain or a downed line.

Emergency Electrician by city

Find emergency electrician in your city

Electrical Panel Upgrade

Most homes in California were wired for a fraction of the load they now carry. Add an EV, a heat pump and an induction range to a 100 amp panel and you run out of capacity long before you run out of ideas. A service upgrade gives you headroom, working space and modern breaker protection.

100 to 200 amp service upgrade

New panel, meter main, grounding and bonding brought up to current code.

Breaker box replacement

Like-for-like swaps when capacity is fine but the equipment is failing or obsolete.

Fuse box removal

Retire the fuses, keep the house wiring, gain real overcurrent protection.

Zinsco and Federal Pacific swaps

Panels with known failure histories replaced with current-listed gear.

Sub panel installation

Feed a garage, ADU, shop or addition without overloading the main.

Meter main combos

Utility-facing equipment replaced along with the service entrance conductors.

Grounding and bonding repair

Ground rods, water bond and neutral separation corrected.

Circuit directory and labeling

A typed, accurate panel schedule at the end of every job.

Electrical Panel Upgrade by city

Find panel upgrade in your city

EV Charger Installation

A Level 2 charger turns overnight into a full battery. The install itself is simple; the part that goes wrong is capacity. We run the load calculation on your California panel first, then quote the charger, the circuit and any panel work as one number so there are no surprises after the drywall is open.

Tesla Wall Connector installation

Hardwired, load-shared where needed, and commissioned on your Wi-Fi.

Universal Level 2 chargers

ChargePoint, Grizzl-E, Emporia, Autel, Wallbox and other listed units.

NEMA 14-50 outlet installation

A 240V receptacle for portable chargers, welders or a future hardwired unit.

Load calculation and panel check

Done before we quote, so the circuit actually fits your service.

Panel upgrades for EV capacity

When 100 amps will not carry the car, we handle the service upgrade too.

Long conduit and trenched runs

Detached garages, carports and driveway pedestals.

Dual charger and load sharing

Two cars on one circuit using the manufacturer's power-sharing setup.

Multi-unit and workplace charging

Small commercial and HOA installs with metering considerations.

EV Charger Installation by city

Find ev charger install in your city

Whole House Rewiring

Rewiring is the least glamorous and most consequential electrical work there is. In older California neighborhoods we still find knob and tube, cloth-insulated conductors and ungrounded two-prong outlets carrying loads nobody imagined in 1948. A rewire replaces the wiring itself rather than patching around it.

Whole house rewiring

New copper branch circuits, grounded devices and a labeled panel throughout.

Knob and tube replacement

Removal of legacy open wiring and the splices hidden in the attic.

Aluminum wiring remediation

Pigtailing with listed connectors or full replacement of branch circuits.

Partial and phased rewires

Kitchen, bath and bedroom circuits done in stages on a budget.

Ungrounded outlet correction

Real grounds instead of a three-prong cover on a two-wire circuit.

Cloth and rubber insulation replacement

Brittle mid-century wiring pulled out and replaced.

Circuit separation

Splitting overloaded shared circuits into dedicated ones.

Drywall access and patching coordination

Minimal, planned openings with patch-ready edges.

Whole House Rewiring by city

Find rewiring in your city

Generator Installation

Public safety power shutoffs and storm outages have made backup power a practical purchase in California, not a luxury. We size standby generators against a real load calculation, install the automatic transfer switch, coordinate the fuel connection, and commission the unit so it actually starts when the grid drops.

Whole house standby generators

Air-cooled and liquid-cooled units with automatic start on outage.

Automatic transfer switch installation

Whole-panel or essential-circuit switching, wired and tested.

Load management

Priority shedding so a smaller unit still runs the AC and the well pump.

Manual transfer switch and interlock kits

The affordable route for an existing portable generator.

Generator pads and mounting

Level, drained, code-clearance placement away from windows and vents.

Fuel line coordination

Natural gas and propane hookups scheduled with the gas fitter.

Sub panel for essential circuits

A backed-up panel holding only what has to stay alive.

Commissioning and exercise testing

Load-bank style verification and a walkthrough of the controller.

Generator Installation by city

Find generator install in your city

Lighting Installation

Lighting is the electrical work you see every day. We lay out recessed cans on a real spacing plan rather than eyeballing it, use dimmers that match the driver so nothing buzzes or flickers, and cut ceiling openings with the patching in mind. California homes and offices both get the same care.

Recessed lighting installation

Laid-out can and wafer lighting with dimming that does not flicker.

Light fixture installation and replacement

Chandeliers, pendants, flush mounts, vanity bars and heavy fixtures.

Outdoor and landscape lighting

Path, uplighting, soffit, security and patio lighting on timers or photocells.

Under-cabinet and cove lighting

Low-profile LED with hidden drivers and clean switching.

LED retrofit and lighting upgrades

Old fluorescent troffers and cans converted to efficient LED.

Dimmer and smart switch installation

Correct dimmer for the driver, and three-way circuits sorted out properly.

Shop, garage and warehouse lighting

High-output linear and high-bay fixtures on dedicated circuits.

Ceiling fan and combo fixtures

Fan-rated boxes, bracing and remote or wall control.

Lighting Installation by city

Find lighting install in your city

Electrical Repair & Troubleshooting

Most electrical repairs are really diagnostic jobs. A dead outlet is a symptom; the cause is a failed device three rooms away, a back-stabbed connection or a loose neutral in a junction box someone drywalled over. We charge for the fix, not for the guessing, and we trace faults methodically.

Dead outlet and circuit diagnosis

Traced from the panel through every device on the branch.

Breaker replacement

Failed and nuisance-tripping breakers matched to the panel bus.

Switch and receptacle replacement

Worn, loose, burnt and painted-over devices swapped out.

GFCI and AFCI troubleshooting

Nuisance trips isolated to the real cause, not just a device swap.

Loose neutral and open ground repair

The cause behind most flickering, dimming and shock complaints.

Junction box and splice correction

Buried, overfilled and unsupported boxes made accessible and legal.

Outdoor and wet-location repairs

Corroded devices, failed covers and water-intruded circuits.

Appliance circuit repair

Range, dryer, HVAC and well pump circuits restored.

Electrical Repair & Troubleshooting by city

Find electrical repair in your city

Outlet & Switch Installation

Not enough outlets is the most common complaint in California homes, and extension cords are the wrong answer to it. Adding receptacles properly means finding a source circuit with capacity, fishing the wire, and installing boxes that are supported and accessible — not surface-mounting a strip and hoping.

Extra outlet installation

New receptacles fished into existing walls with minimal patching.

GFCI outlet installation

Kitchen, bath, garage, laundry and exterior protection.

AFCI protection

Arc-fault breakers or devices for bedroom and living area circuits.

Dedicated circuit installation

Microwave, fridge, freezer, office, treadmill and shop tool circuits.

240V appliance circuits

Range, dryer, wall oven, welder and hot tub feeds.

Hot tub and spa electrical

Disconnect, GFCI protection and correct burial or conduit run.

Switch, dimmer and smart switch installs

Including three-way and multi-location control.

Outdoor and weather-resistant receptacles

In-use covers, correct wet-location devices, patio and yard power.

Outlet & Switch Installation by city

Find outlets & switches in your city

Commercial Electrician

Commercial electrical work is judged on downtime. We schedule California tenant improvements, lighting retrofits and panel work for nights and weekends so your doors stay open, and we keep a maintenance list so small faults get caught during planned visits rather than during lunch rush.

Tenant improvement electrical

New layouts, added circuits, lighting and data rough-in for build-outs.

Three-phase power and motor circuits

Distribution, disconnects, starters and equipment hookups.

Commercial lighting retrofit

LED conversions with occupancy sensing and reduced maintenance.

Restaurant and kitchen electrical

Hood interlocks, equipment circuits and grease-area device replacement.

Warehouse and high-bay work

High-output lighting, outlets, dock power and machine circuits.

Panel and distribution upgrades

Switchgear, panelboards, sub panels and load redistribution.

Scheduled electrical maintenance

Thermal checks, torque verification and a written fault list.

After-hours emergency response

Night, weekend and holiday commercial callouts.

Commercial Electrician by city

Find commercial work in your city

Smart Home Wiring

Smart home projects fail on wiring, not on apps. Most older California switch boxes have no neutral, no ground and no room for a smart device. We add what the hardware needs, install it, and set up the switching so the automation is reliable instead of a hobby.

Smart switch and dimmer installation

Including adding neutrals and sorting out three-way circuits.

Neutral wire additions

The single most common blocker for smart switches in older homes.

Video doorbell wiring

Correct transformer, chime bypass and hardwired power.

Camera and PoE wiring

Hardwired exterior and interior cameras with network runs.

Structured network cabling

Cat6 drops, patch panel and a tidy equipment location.

Smart lighting scenes and keypads

Multi-location control that guests can actually operate.

Sensors, locks and thermostat wiring

Occupancy, leak and contact sensors, plus C-wire additions.

Smart panel and energy monitoring

Circuit-level monitoring and controllable breaker systems.

Smart Home Wiring by city

Find smart home wiring in your city

Book any of these today

Open 24 hours, 7 days a week. Flat pricing agreed before work starts.

(833) 652-8933

Call now Request service

Electrical services across California